-
Operating
Voltage: 10-30V D.C.
-
P.C.B.
Dimensions 137mm x 74mm x ~33mm.
-
Atmel
AT90S8515 Flash Micro-controller based module
(40 pin DIP)
-
16
Inputs (NC, NO or up to 30Vdc Input).
-
Can
be customized for a mix of inputs and/or digital
CMOS outputs.
-
8
DIP switches to set address or other parameters.
-
With
standard firmware the input data can be sent as
positive or negative polarity.
-
RS485
driver built in or RS232 with interface module.
-
Standard
Atmel 6 pin programming connector to program Flash
memory for development.
-
Transorbs
before and after the regulator.
-
Common
terminals for the inputs can be set for 0 Volts
or V+.
-
Input
termination resistors can be terminated at 0 Volts
or +5 Volts. (Pull up or pull down)
